GNS3 Alpha 4 using Ubuntu 13.10 Guide

indexUse the below commands to install the new GNS3 v1.0 Alpha 4 on Ubuntu 13.10 64-bit.

 

 

Just remember to update the url’s as and when new GNS3 versions are released. If you look down in the right hand corner of the main https://github.com/GNS3/ page you will see the ” Download Zip” button, just right click and copy the link location and use that as the wget link.


sudo apt-get update

sudo apt-get install build-essential python3.3-dev python3-setuptools python3-pyqt4 python3-ws4py python3-pip libelf-dev uuid-dev libpcap-dev python3-zmq python3-tornado python-netifaces

sudo pip3 install -U pip
sudo pip install -U setuptools
sudo pip install -U ws4py
cd /opt
sudo wget https://github.com/GNS3/dynamips/archive/master.zip
sudo unzip master.zip
sudo rm master.zip
cd dynamips-master
sudo make
cd ..
sudo wget https://github.com/GNS3/gns3-gui/archive/master.zip
sudo unzip master.zip
sudo rm master.zip
cd gns-gui-master
sudo python3 setup.py install
cd ..
sudo wget https://github.com/GNS3/gns3-server/archive/master.zip
sudo unzip master.zip
sudo rm master.zip
cd gns3-server-master
sudo python3 setup.py install

Once you have finished, test by issuing the gns3 command from within the /opt/gns3-gui-master directory.
You will not be able to drag a router onto the workspace until you have set the patch for dynamips. Whilst in GNS3 head to edit —> preferences —> Dynamips  and then the path to /opt/dynamips-master/dynamips.stable. You just save and exit then try to drag the router icon onto the page.

You should be good go…the rest is on you.

Good Luck!

Share and Enjoy:
  • Facebook
  • Google Bookmarks
  • Digg
  • email
  • LinkedIn
  • Live

Leave a Reply